+34 910 480 011
    WhatsApp
    Sincla

    Boxes for Christmas? Order as early as you can: the factory gets overloaded and lead times get longer. Last day to order up to 1,000 boxes: 25 October 2026. See all deadlines

    Packaging for potters and makers

    Wooden boxes that look after every piece

    Boxes with lids, trays and baskets for mugs, bowls, vases or ceramic jewellery. They arrive flat, go together in 20-30 seconds and carry your branding from 50 units.

    Order sample packFind your box

    Unbranded from 1 box · With your branding from 50

    Sincla wooden box with a white lidded ceramic mug on green moss; behind it, the box lid

    The piece, protected and beautifully presented.

    Box with lid · poplar wood

    Food contact

    Regulation (EC) No 1935/2004, no glue or staples.

    From 1 unit

    Unbranded. Branding from 50 units.

    Shipping date before you pay

    The configurator works it out for your order.

    Made in our own workshop in Navarre

    Workshop in Esquíroz, just outside Pamplona.

    Your piece

    Which box does your piece need?

    Choose the pieces and how many go together. We find the closest-fitting box in the catalogue, with room for padding, and take you to the configurator with it already selected.

    Start with an idea

    What goes in the box?

    • Mug12 × 9 × 10 cm · 0.35 kg2
    • Bowl15 × 15 × 7.5 cm · 0.45 kg2
    • Dinner plate (26 cm)26 × 26 × 2.5 cm · 0.6 kg0
    • 25 cm vase, lying down25 × 12 × 12 cm · 0.9 kg0
    • Plant pot14 × 14 × 12.5 cm · 0.7 kg0
    • Candle holder9 × 9 × 7 cm · 0.3 kg0
    • Small figurine12 × 9 × 13 cm · 0.4 kg0
    • Tile (15 × 15 cm)15 × 15 × 1 cm · 0.25 kg0
    Weight of the pieces1.6 of 3 kg

    Approximate sizes of typical pieces. We lay them out in a single layer and leave 1 cm on each side for protective padding. If yours are a different size, ask us.

    Box with lid: 40 × 30 × 14 cm

    Best fit

    Box with lid

    40 × 30 × 14 cm

    Outer size: length × width × height

    How it would look, seen from above

    The pieces take up 63% of the base. The rest is for padding.

    Configure this box

    It also fits in:

    Something out of the ordinary?

    Sculptures, tall pieces, full tableware sets or made-to-measure dividers: tell us the measurements and we’ll tell you whether we can do it and how long it takes.

    Real projects

    Workshops already shipping in wood

    Artists, workshops and handmade brands already presenting their work in our boxes.

    Wooden box with lid engraved with the title of an art project and “Limited edition”
    The box for an artist’s limited edition
    Open box with lid with the colour illustrated logo of a workshop making hand-painted baby shoes inside the lid
    An illustrated logo, printed in colour inside the lid
    Shelves with boxes whose lids are engraved with a monogram and a thank-you message, one open with handmade soaps and candles
    Handmade soaps and candles, with the engraved lid
    Wooden countertop display with “Ecológico, biodegradable, sostenible” engraved on the front, next to a plant
    An engraved counter display
    Small open box with a geometric fox illustration engraved on the base, on soil and leaves
    An illustration engraved inside the box

    Made for makers

    Your piece is one of a kind. The box should live up to it.

    Six common packaging stumbling blocks in a pottery or craft workshop, and how Sincla solves them.

    No room left in the workshop for boxes

    The wheel, drying racks and kiln already fill the workshop, and assembled boxes eat up the space you have left.

    Delivered flat: 80% less volume.

    Fear of pieces arriving broken

    Fired ceramics don’t forgive knocks, and a cardboard box that gives way leaves the piece exposed. Every breakage means a lost piece, wasted shipping costs and a disappointed customer.

    Rigid wood that doesn’t give, with room for padding.

    A one-off piece in a generic box

    Your customers pay for something handmade and receive it in the same cardboard box as a hardware order.

    A wooden box with your brand that does the piece justice.

    Huge minimums for branding

    To add your logo, many suppliers ask for runs of hundreds or thousands of boxes: unworkable for a workshop or a limited series.

    With your branding, from 50 units.

    Setting up and packing away the stall at every fair

    Cardboard displays that don’t survive two fairs and boxes that fill half the car on the way home.

    Trays and boxes that come apart and travel home flat.

    Pieces that don’t fit any box

    Tall vases, large plates or sculptures: with standard sizes, the piece either rattles around or doesn’t fit.

    Hundreds of catalogue sizes, and made-to-measure boxes on request.

    Storage

    More room to work. Less room for boxes.

    Receive your boxes unassembled, store them flat and prepare only the ones you need for your orders.

    THE SAME ORDER: 500 BOXES

    Same boxes. Much less space.

    Compare the space occupied by the same order before and after assembling the boxes.

    500 assembled boxes

    The same 500 boxes, stored flat

    Space you get back
    −80 %

    volume when stored flat. Assemble only the boxes you need.

    Indicative diagram drawn to the same scale, based on an 80% reduction in volume. Actual savings depend on the format and stacking.

    Sincla wooden boxes stacked flat before assembly
    This is how they arrive: flat, stackable and without shipping air.

    Flat format: 80% less space

    The boxes arrive flat and take up 80% less space than assembled ones. Your stock of boxes fits on a set of shelves and you only assemble the ones you’re about to send.

    Patented twist-lock system

    The corner pieces lock in with a quarter turn, with no staples, nails or glue. A box is ready in 20-30 seconds on the packing table.

    Rigid wood for fragile pieces

    Poplar sides that don’t give like cardboard. With padding around it, the piece stays in place and well presented, and each box takes up to 3 kg.

    Your logo engraved from 50 units

    Laser engraving from €0.10 per face, with no dies or moulds: your signature on every box, for a series, a collection or a fair.

    Assembly

    Assembled in 20-30 seconds, without tools

    The patented twist-lock corners replace staples, nails and adhesives. One person assembles more than a hundred boxes in an hour, with no training.

    1. Take out the pieces

      They arrive pre-cut and stacked flat. Nothing to cut or prepare.

    2. Fit the corner pieces

      Insert them with a quarter turn in each corner and the sides lock into place.

    3. Ready to fill

      A firm, stable box in 20-30 seconds. And it comes apart to store flat again.

    No staplesNo nailsNo adhesivesReusable

    Branding

    Your workshop, engraved on every box.

    Your logo, your signature or the name of a collection. Engrave the wood from 50 boxes and change the design with each series.

    Wooden box with lid engraved with a forge workshop’s logo and “Hecho a mano en España” (handmade in Spain), on dry grass

    50

    units for custom branding

    From €0.10

    laser engraving per face

    White Sincla wooden box with the CIMSA logo engraved on the lid, next to sample cubes of different woods
    With the logo engraved, the box becomes part of the collection.

    The same signature as on the piece

    The mark you put on the base of the piece, on the box lid too.

    A box for every collection

    Limited series, seasonal collections or commissions: adapt the engraving to each one without ordering thousands of boxes.

    Commissions and gifts

    The recipient’s name or a personal message, for special commissions, weddings or corporate gifts.

    Choose the available faces for your model and see the final price in the configurator. We can also discuss screen printing, pyrography or labelling for your project.

    Design your box

    Sales ideas

    Ideas for your workshop

    From small pieces to the market stall: three ideas that work. Start with the one that suits your work best.

    Small Sincla wooden boxes with “Street Art” on the lid and enamelled pieces on top

    Ceramic jewellery and small pieces

    Earrings, brooches or enamelled pieces in boxes from 5.5 × 5.5 cm, with your brand on the lid and a cushion or card inside.

    Try: a 10 × 10 cm box with a cushion and your signature engraved

    Metal horse sculpture standing inside a large wooden box

    Vases, sculptures and large pieces

    Boxes with lids up to 55 × 55 × 20 cm with padding all round, and made-to-measure boxes on request for pieces that don’t fit.

    Try: a standing sculpture in a large box, held in place with shred

    Sincla wooden display with a printed panel reading “minilibros artesanales en corcho” and small printed lid boxes for each book, with “Hand made in Basque Country” on the front

    Craft fairs and markets

    Trays and open boxes as displays on the stall; at the end of the day, they come apart and travel home flat.

    Try: branded trays as displays and boxes with lids for each sale

    Images show presentation ideas. Pieces, cushions and padding are not included.

    Comparison

    Compare and choose

    What changes in storage, assembly and presentation. Compare each option with how you plan to use it.

    Flat storage

    Cardboard
    With folding designs
    Conventional wood
    Depends on the design
    Sincla
    Delivered flat

    Tool-free assembly

    Cardboard
    Depends on the closure
    Conventional wood
    Preassembled or model-dependent
    Sincla
    By hand, in 20–30 s

    Premium presentation

    Cardboard
    Depends on design and finish
    Conventional wood
    Wood finish
    Sincla
    Customisable poplar wood

    Branding on short runs

    Cardboard
    Minimum varies by supplier
    Conventional wood
    Minimum varies by supplier
    Sincla
    From 50 units

    Customer reuse

    Cardboard
    Possible if kept in good condition
    Conventional wood
    Depends on construction and condition
    Sincla
    Can be taken apart and reused

    Indicative comparison: cardboard and wooden boxes cover many designs. Minimum orders, finishes and reuse options depend on the product and supplier.

    Prices, minimums and lead times

    What it costs and how long it takes, with no surprises

    The configurator works out the price and the shipping date for your actual order: measurements, quantity, branding and shipping method.

    From 1 unit

    You can order a single unbranded box. Below 50 units a small-quantity surcharge applies, shown before you pay.

    Branding from 50 units

    Engraving starts at €0.10 per face. You upload your logo in the configurator and choose which faces it goes on.

    The shipping date, before you pay

    The lead time depends on the factory workload, the quantity and the branding: up to 20 working days and often considerably less. There is an express option if you are cutting it fine for a fair or a campaign.

    Sincla sample pack of wooden boxes in different formats

    Before you order

    Feel them before you decide: sample pack for €19.99

    Feel the wood, try the assembly and judge the finish before you order your boxes.

    You get a €19.99 voucher, valid for 15 days, for your order of 50 boxes or more. Delivery in 48-72 h, shipping calculated at checkout.

    Order the sample pack

    Frequently asked questions

    What makers ask before ordering

    Planning for a fair or a collection?

    Tell us which pieces, how many boxes and by when. We’ll tell you which box suits you and the lead time.

    Your next fair, with Sincla

    You make the piece. We make the box.

    Order the samples, try the assembly and decide with the box in your hands.

    Order sample packFind my box

    Sectors that also choose us

    Jewellery
    Gifts
    Natural cosmetics
    Photography studios

    Resources you might find useful

    Flat-pack: 80% less space

    Reclaim your warehouse

    Laser engraving from 50 units

    No runs of thousands

    From 1 unit

    Customisation from 50